KRUGER Fan Accessories - DUCATI Capacitor For Exhaust Fan Motor 1.2µF, 7.5µF, 12µF, 16µF

Kruger Fan Accessories - Capacitor For Exhaust Fan Motor 1.2µF, 7.5µF, 12µF, 16µF

Capacitor for Kruger Ventilation Fan with Exhaust Motor

Ceiling Fan capacitors Power Supply Motor

Capacitor for Kruger Ceiling Fan to Increase Speed

Capacitors for electric motors are used for motor starting and running. 
Available in both plastic case (safety class S0 and S3) and metal case (safety class S2).

DUCATI Capacitor - Electrical specifications and definitions

RATED VOLTAGE Vn
The rms value of the sinusoidal ACvoltage which can be applied to the capacitor in normal working conditions.

RATED CURRENT In
The value of the current flowing through the capacitor of rated capacitance at the rated voltage and frequency

DUTY FREQUENCY RANGE
The capacitors can be used at a frequency range of 50-60 Hz. Use at higher frequencies is possible provided the voltage, current, temperature and power limits are complied with. 

OPERATING TEMPERATURE CLASS
The capacitors can be used at a frequency range of 50-60 Hz. Use at higher frequencies is possible provided the voltage, current, temperature and power limits are complied with.

STORAGE TEMPERATURE —40°... + 85 °C

CAPACITANCE TOLERANCE
Rated tolerance ± 5%
Different tolerance values are available on request

LOSS ANGLE tanδ
The value of the tangent of the loss factor measured at 50 Hz, 20°C at the rated voltage is: tgδ ≤ 20∙10-4

MAXIMUM PERMISSIBLE OVERLOADS
The capacitors can operate in the following overload conditions throughout the temperature class range:
I max = 1.3 In V max = 1.1 Vn
The overload deriving from the simultaneous presence of voltage and current above the rated values, even if within the stated limits, must be such that the apparent power Pa (Irms x Vrms) absorbed by the capacitor is: Pa ≤ 1.35 ⋅ 2π f ⋅ C ⋅ Vn2

PULSED STRESS
The capacitors are capable of withstanding steep wavefronts with a maximum voltage variation speed of 20 V/µs.

INSULATION RESISTANCE BETWEEN TERMINALS AND CASE
Measured at 500 Vdc, 20 °C after 30 s Ri > 1000 MΩ

QUALITY
The great attention to the product quality and to the customer service are constants in DUCATI’s history and these are main factors which contribute
to its success all over the world. 
Ducati has always been one of the first companies, in its field, in Italy and in Europe to adopt the most modern standards and procedures in order to assure the highest level of the quality
and reliability of products.
The QUALITY SYSTEM of Ducati Energia S.p.A., capacitor division, as described in Quality Manual, has been one of the first in Italy to be approved by CSQ according to ISO 9001 (Certificate 9170 DUC 2).
All is garanted thanks to fully automated and integrated processes, to completely new and innovative machines and technologies, to methodologies of the productive processes control based on accurate specifications and on responsible operator. The averent series are certified according to the new european EN 60252-1/A1 standard.
Note relevant to RoHS directive
In line with 2011/65/EU (RoHS2) european directive and subsequently amended, all the capacitors produced by Ducati Energia S.p.A., since lune 2005, are manufactured in compliance with the above directive. 

SPECTIFICATION
Colour: Silver
Capacity: 1.2µF, 7.5µF, 12µF, 16µF
Installation: Built-In/Integrated / Freestanding
Brand: Ducati
Origin: Made in ROMANIA
Suitable For: Ventilation Fan, Condenser Dryer, Vented Dryer